How Merchtroid tees fit. Unisex staple tee (Bella+Canvas 3001 blank) - runs true to size. Side-seamed, retail fit. If you want a relaxed look, size up one. If you want fitted, stick to your usual. Measurements are taken laid flat.
Size chart - INCHES
| Size | Length | Width | Sleeve length |
|---|---|---|---|
| XS | 27 | 16 ½ | 7 ¼ |
| S | 28 | 18 | 7 ¾ |
| M | 29 | 20 | 8 ⅛ |
| L | 30 | 22 | 8 ½ |
| XL | 31 | 24 | 8 ⅞ |
| 2XL | 32 | 26 | 9 ¼ |
| 3XL | 33 | 28 | 9 ⅝ |
| 5XL | 35 | 32 | 10 ⅜ |
Size chart - CENTIMETERS
| Size | Length | Width | Sleeve length |
|---|---|---|---|
| XS | 68.6 | 41.9 | 18.4 |
| S | 71.1 | 45.7 | 19.7 |
| M | 73.7 | 50.8 | 20.6 |
| L | 76.2 | 55.9 | 21.6 |
| XL | 78.7 | 61 | 22.5 |
| 2XL | 81.3 | 66 | 23.5 |
| 3XL | 83.8 | 71.1 | 24.4 |
| 5XL | 88.9 | 81.3 | 26.4 |
How to measure.
- Length - place the end of the tape at the highest point of the shoulder (next to the collar) and measure straight down to the bottom hem.
- Width - measure across the chest one inch below the armhole, from seam to seam, laid flat.
- Sleeve length - from the center of the back collar, over the shoulder, and down to the end of the sleeve.
Specs match the Bella+Canvas 3001 unisex jersey tee as fulfilled by our print partner. Tolerance ± ½" on every measurement per the manufacturer spec sheet.